Hired-hand Evolution Series 3000/3001: HUMIDITY SENSOR QUICK- Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Hired-hand Evolution Series 3000/3001: HUMIDITY SENSOR QUICK- herunter. Hired-Hand Evolution Series 3000/3001: HUMIDITY SENSOR QUICK-CONNECT User Manual [en] Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 4
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
INSTALLATION INSTRUCTIONS
HUMIDITY SENSOR QUICK-CONNECT
HIRED-HAND MFG., INC. • 1733 County Rd 68 • Bremen, Alabama 35033 · Phone 256-287-1000 • Fax 256-287-2000
Part No. 4802-5103 rev 5-08 Page 1 of 4
Tools Required
Small flat-head screwdriver
Kit Part Number
6450-5107 /KIT Humidity Sens Quick-Connect
DESCRIPTION
This connector kit is provided to allow easy removal of
the Humidity Sensor during wash-down or between
grow-outs. The kit includes the male connector, female
connector, and the male cap w/lanyard.
When the kit is received, check for shipping damage or
missing parts.
Wire Connections / Assembly
The male-pinned portion of the quick-connect should be
connected to the Humidity Sensor and the female
socketed end connected to the wiring toward the
controller.
(1) Unscrew the locking screw counter-clockwise
from the Male Connector housing by using a
small flat-head screwdriver. Refer to Figure 1.
(2) Remove the male-pinned insert from the
connector housing.
(3) Loosen the gland nut enough to allow the
Humidity Sensor cable to be inserted thru the
housing assembly as shown in Figure 1.
(4) Strip the humidity sensor outer jacket and three
wires as shown in Figure 3.
(5) Connect the humidity sensor cable/wires to the
male-pinned insert as shown in Figure 3.
(6) Reassemble the connector assembly as shown in
Figures 1 and 3.
(7) Reinstall the Locking Screw
(8) Tighten the Gland Nut securely around the cable.
WARNING!
Ensure that the Electrical Power Sources
are OFF during wiring / installation.
Humidity
Sensor
(Not Included)
Cap
(Male
Pins)
Male
Pins
Female
Sockets
Catch
Quick-
Connect
Figure 1:
Male Connector
Male Pins
Locking Screw
(Opposite Side)
Rubber Seal
Gland Nut
Metal Washer
Toward
Humidity Sensor
Seitenansicht 0
1 2 3 4

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS HUMIDITY SENSOR QUICK-CONNECT HIRED-HAND MFG., INC. • 1733 County Rd 68 • Bremen, Alabama 35033 · Phone 256-287-1000 • Fax

Seite 2 - Connector

HIRED-HAND MFG., INC. • 1733 County Rd 68 • Bremen, Alabama 35033 · Phone 256-287-1000 • Fax 256-287-2000 Part No. 4802-5103 rev 5-08 Page 2 of 4

Seite 3 - WARNING!

HIRED-HAND MFG., INC. • 1733 County Rd 68 • Bremen, Alabama 35033 · Phone 256-287-1000 • Fax 256-287-2000 Part No. 4802-5103 rev 5-08 Page 3 of 4

Seite 4

HIRED-HAND MFG., INC. • 1733 County Rd 68 • Bremen, Alabama 35033 · Phone 256-287-1000 • Fax 256-287-2000 Part No. 4802-5103 rev 5-08 Page 4 of 4

Kommentare zu diesen Handbüchern

Keine Kommentare